MAGNETIC SLIDE CONVEYOR

Steel parts are elevated and conveyed over an anti-magnetic sliding surface using magnets. The permanent magnet system that circulates under the sliding surface features grouped magnetic field lines, making it highly effective. It grabs hold of the steel parts, pulls them across the sliding surface and conveys them to the discharge end in the same circulating frequency speed.

All moving parts of this unique transporting system are located within the body of the machine where they are greased for life and hermetically sealed against any external intrusion. This all-round seal makes these Magnetic Slide Conveyors ideal for the use in cooling oil, quenching, and emulsion baths as well as continuous-flow washing machines. The strict separation of drive components and conveying material guarantees an extremely reliable and safe transporting system.

By using different sizes of magnets and permanent magnet systems, even flat scrap or scrap strips can be conveyed. The configuration of the magnets is chosen based on the material to be conveyed and required throughput. Options include hard ferrite or neodymium magnets, also in various combinations. To ensure maximum reliability, the magnets are glued to each other and to their carrying frame using high-strength epoxy in addition to a specially designed, spot-welded stainless-steel cover. Low conveyor frame heights enable use in areas that are limited in space.

MAGNETIC SLIDE CONVEYOR
Effective widths 4“, 6“, 8“, 10“, 12“, 14“, 16“, 18“, 20“, 22“, 24“, 26“, 27.5“, 29.5“, 31.5“
Size Designations T6, T9.525, T19.05 and T63
Conveying speeds 10 ft.  to 52.5 ft./min (in special cases for T63 up to a maximum of 72 ft./min)
Incline angles 30°, 45°, 60° or 75 ° (custom angles are also possible)
Line management Shapes: Horizontal, L, C or Z-Shape
Chain configurations For the sizes T6 and T9.525 we use roller chains, the sizes T19.05 and T63 utilize hollow-pin chains. Up to the size T19.05 the chains run on PE-sliding rails.

The size T63 is exclusively built with a steel sliding rail system with oil lubrication system.

The Magnetic Slide Conveyor

Read more about the Magnetic Slide Conveyor, its options and its advantages.

If you have any questions or are interested, please contact us directly!

 


SALES

Bill Gregory

  +1 423 915 803

ADVANTAGES

  • High safety standard (no moving parts outside of the conveyor)
  • Low-profile frame height starting at 1.38”
  • Low maintenance
  • Hermetical seal enables various application areas
  • Lubricated for life
  • Individual line management

ADVANTAGE

Low Maintenance

On the inside of the Magnetic Slide Conveyor, the chains run along rails constructed out of PE material. The lack of oil lubrication is a distinctive advantage of its design and lets it outperform oil-filled models, especially in terms of maintenance. In combination with a primary filling of grease, re-lubrication is not necessary even under permanent operation. Complemented by an automatic chain-tensioning unit, you are left with minimal maintenance.

H-DESIGN

L-DESIGN

Z-DESIGN

Photo Gallery

 

SHOW MORE > SHOW LESS <

OPTION

Control Box

A control box serves as a temporary storage for batching purposes in screw production. First the parts are collected inside the storage box. They are then inspected and the batch is emptied into either a larger storage container (accepted parts) or a smaller container (rejected parts). To do so, a sloped door is manually opened with a sliding handle to discharge parts. Special designs (e.g. a double control box) are possible.

OPTION

Demagnetizing Coil

When parts have been in contact with a magnetic field, they are known to retain magnetism within the parts. Depending on the use case, it can be necessary to fully demagnetize the parts. Demagnetizing coils serve exactly this purpose. The parts are directed through the opening in the coil which features a strong alternating magnetic field. Afterwards they are demagnetized.

 

 

OPTION

Casters

To allow use with different machines or for easier installation, it can be beneficial to equip the Magnetic Slide Conveyor with castors. We offer fixed and swivel castors for simple displacement by hand and/or with profiled rollers for precise positioning of the conveyor in a machine.

OPTION

Multi-Track Switch

If parts are to be disposed into multiple containers, the discharge of the conveyor can be fitted with a seesaw chute, a two-way chute, a swivel chute or a multi-track switch. The distribution can be done manually or automatically, with an electric drive or electro pneumatically.

TEST CENTER

Tests with Client Parts

We have a test unit in our test center that can be used to carry out variuos tests. By adjusting to different shapes and demands, we set the foundation to creating a client’s individual, optimal result. To perform tests on site, the test unit will require installation into the production line and sample batches must be ran for results. Feel free to reach out to us for more information!

 

VIDEOS

In Action

DO YOU HAVE
QUESTIONS ABOUT
THE MAGNETIC SLIDE CONVEYOR?


SALES

Bill Gregory

  +1 423 915 803

CONTACT FORM

Write to us!

You can can contact us quickly and easily using the form below. We will get back to you as soon as possible!
Or you can reach our headquarters at + (423) 915 – 0472.

 

    captcha

    By submitting this form, you confirm the processing of your data and agree to our privacy policy.

    Contact

    Do you have questions?

    Call us at (423) 915 0472, write to us at info@goesslingusa.com or simply use the contact form below. We are looking forward to your message!

     

      By submitting this form, you confirm the processing of your data and agree to our privacy policy.

      Jöst Group Logo